A barrage balloon is a type of airborne barrage, a large uncrewed tethered balloon used to defend ground targets against aircraft attack, by raising aloft steel cables which pose a severe risk of collision to hostile aircraft, making the attacker's approach difficult and hazardous. Early barrage balloons were often spherical. The kite balloon, having a shape and cable bridling which stabilises the balloon and reduces drag, could be operated at higher wind speeds than could a spherical balloon. Some examples carried small explosive charges that would be pulled up against the aircraft to ensure its destruction. Barrage balloons are not practical against high-altitude aircraft—the long cable required for a high-altitude balloon would be too heavy.
First World War
France, Germany, Italy and the United Kingdom used barrage balloons in the First World War. While the French and German forces developed kite balloons, early British barrage balloons were spherical.[1]
Sometimes, especially around London, several balloons were used to lift a length of "barrage net": a steel cable was strung between the balloons and more cables hung from it. These nets could be raised to an altitude comparable to the operational ceiling (15,000 feet or 4,600 metres) of the bombers of that time period. By 1918 the barrage balloon defences around London stretched for 50 miles (80 km), and captured German pilots expressed great fear of them.[2]
Second World War
In 1938, the British Balloon Command was established to protect cities and key targets such as industrial areas, ports and harbours. Balloons were intended to defend against dive bombers flying at heights up to 5,000 feet (1,500 m), forcing them to fly higher and into the range of concentrated anti-aircraft fire: anti-aircraft guns could not traverse fast enough to attack aircraft flying at low altitude and high speed. By the middle of 1940 there were 1,400 balloons, a third of them over the London area.
While dive-bombing was a devastatingly effective tactic against undefended targets, such as Guernica and Rotterdam, dive-bombers were very vulnerable to attack by fighter aircraft when pulling up after having completed a bombing dive. Due to the effectiveness of the Royal Air Force fighters' tactic of waiting for a dive bomber to complete its dive and then pouncing when it was pulling up - a moment when it was slow and vulnerable - the use of dive bombers against the UK was discontinued by Nazi Germany. Balloons proved to be of little use against the German high-level bombers with which the dive-bombers were replaced, but continued to be manufactured nonetheless, until there were almost 3,000 in 1944. They proved to be effective against the V-1 flying bomb, which usually flew at 2,000 feet (600 m) or lower but had wire-cutters on its wings to counter balloons. 231 V-1s are officially claimed to have been destroyed by balloons.[3]
The British added two refinements to their balloons, "Double Parachute Link" (DPL) and "Double Parachute/Ripping" (DP/R). The former was triggered by the shock of an enemy bomber snagging the cable, causing that section of cable to be explosively released complete with parachutes at either end; the combined weight and drag bringing down the aircraft. The latter was intended to render the balloon safe if it broke free accidentally. The heavy mooring cable would separate at the balloon and fall to the ground under a parachute; at the same time a panel would be ripped away from the balloon causing it to deflate and fall independently to the ground.[4]
In January 1945, during Royal Navy Fleet Air Arm raids on the Palembang oil refineries, the British aircrews were surprised by the massive use of barrage balloons in the Japanese defences. These were spherical and smaller than the British type. One Grumman Avenger was destroyed, and its crew killed, from striking a balloon cable.[5]
Barrage balloons were partly filled with highly pure hydrogen.[6] "The top of the balloon was filled with hydrogen, the bottom half was left empty, so when it was put up at a certain height it filled with natural air", according to Dorothy Brannan, barrage balloon volunteer in Portsmouth, England.[7]
Power line disruption
In 1942, Canadian and American forces began joint operations to protect the sensitive locks and shipping channel at Sault Ste. Marie along their common border among the Great Lakes against possible air attack.[8] During severe storms in August and October 1942 some barrage balloons broke loose, and the trailing cables short-circuited power lines, causing some localised disruption to mining and manufacturing.[citation needed] In particular, metals production was disrupted. Canadian military historical records indicate that one of the more serious incidents, known as "The October Incident", caused an estimated loss of 400 tonnes of steel and 10 tonnes of ferro-alloys.
As a result, balloons were stored during the winter months and training was improved.[citation needed] Lessons learned from breakaway balloons led to Operation Outward, intentional release of balloons trailing conductive cables to disrupt power supplies on the occupied European mainland.
Target identification
On the road to Aachen in west Germany in 1944, the British 2nd Tactical Air Force floated barrage balloons along the American First Army sector front line (a.k.a. "bomb line") to designate the location of friendly troops during the air assault preceding the advance of ground forces, which took Aachen on October 21, 1944. Conversely, during the First Army advance past Aachen to nearby Düren, barrage balloons were floated eastward to mark the location of enemy troops to be bombed.[9]
Post-war nuclear weapon tests
After the war, some surplus barrage balloons were used as tethered shot balloons for nuclear weapon tests throughout most of the period when nuclear weapons were tested in the atmosphere. The weapon or shot was carried to the required altitude slung underneath the barrage balloon, allowing test shots in controlled conditions at much higher altitudes than test towers. Several of the tests in the Operation Plumbbob series were lifted to altitude using barrage balloons.[10]
See also
References
- ↑ Sadd, F. Russell; "Eyes for the Artillery", Aeroplane Monthly, June 1976, pp.298-301.
- ↑ Ege, L. "Balloons and Airships", Blandford (1973).
- ↑ "Barrage Balloons for Low-Level Air Defense". Air & Space Power Journal. Summer 1989. Archived from the original on 2007-08-12. Retrieved 2007-04-16.
- ↑ [1] RAF Museum online exhibition "Air Diagrams"
- ↑ Iredale, W. The Kamikaze Hunters 2015 pp189-208 ISBN 9780230768192
- ↑ "#VEDay75: How thousands of gas-filled balloons helped defend the UK from enemy attack". Cadent Gas. 2020-05-09. Archived from the original on 2020-08-07. Retrieved 2021-06-07.
- ↑ Young, Wendy (2005-07-26). "Barrage Balloons". BBC WW2 People's War. Archived from the original on 2013-08-11. Retrieved 2021-06-07.
- ↑ "Protecting Steel Lifeline / Barrage balloon goes aloft at Sault Ste. Marie, Mich., to protect Soo canal against possible air raids..." [photo caption], The Lima News [Lima, OH], 9 Apr. 1942, p. 3.
- ↑ Keeney, L. Douglas (2020). "WWII Liberation of Europe - Into Nazi Germany". Amazon. Retrieved 2021-06-07.
- ↑ "Operation PLUMBBOB" (PDF). Defense Threat Reduction Agency. Archived (PDF) from the original on 2016-10-19.
External links
- Barrage Balloon Reunion Club
- Popular Science, August 1943, British Barrage Balloon Secrets
- BBC's WW2 People's War: Barrage Balloons
- RAF Barrage Balloon Squadrons
- Barrage Balloon in the WWII
Lua error in Module:Authority_control at line 186: attempt to index field 'wikibase' (a nil value).