Decimal degrees

Decimal degrees (DD) is a notation for expressing latitude and longitude geographic coordinates as decimal fractions of a degree. DD are used in many geographic information systems (GIS), web mapping applications such as OpenStreetMap, and GPS devices. Decimal degrees are an alternative to using sexagesimal degrees (degrees, minutes, and seconds - DMS notation). As with latitude and longitude, the values are bounded by ±90° and ±180° respectively.

Positive latitudes are north of the equator, negative latitudes are south of the equator. Positive longitudes are east of the Prime Meridian; negative longitudes are west of the Prime Meridian. Latitude and longitude are usually expressed in that sequence, latitude before longitude. The abbreviation dLL has been used in the scientific literature with locations in texts being identified as a tuple within square brackets, for example [54.5798,-3.5820]. The appropriate decimal places are used, negative values are given as hyphen-minus, Unicode 002D.

Precision

The radius of the semi-major axis of the Earth at the equator is 6,378,137.0 metres (20,925,646.3 ft) resulting in a circumference of 40,075,016.7 metres (131,479,714 ft). The equator is divided into 360 degrees of longitude, so each degree at the equator represents 111,319.5 metres (365,221 ft). As one moves away from the equator towards a pole, however, one degree of longitude is multiplied by the cosine of the latitude, decreasing the distance, approaching zero at the pole. The number of decimal places required for a particular precision at the equator is:

Degree precision versus length

decimal places	decimal degrees	DMS	Object that can be unambiguously recognized at this scale	N/S or E/W at equator	E/W at 23N/S	E/W at 45N/S	E/W at 67N/S
0	1.0	1° 00′ 0″	country or large region	111 km	102 km	78.7 km	43.5 km
1	0.1	0° 06′ 0″	large city or district	11.1 km	10.2 km	7.87 km	4.35 km
2	0.01	0° 00′ 36″	town or village	1.11 km	1.02 km	0.787 km	0.435 km
3	0.001	0° 00′ 3.6″	neighborhood, street	111 m	102 m	78.7 m	43.5 m
4	0.0001	0° 00′ 0.36″	individual street, large buildings	11.1 m	10.2 m	7.87 m	4.35 m
5	0.00001	0° 00′ 0.036″	individual trees, houses	1.11 m	1.02 m	0.787 m	0.435 m
6	0.000001	0° 00′ 0.0036″	individual humans	111 mm	102 mm	78.7 mm	43.5 mm
7	0.0000001	0° 00′ 0.00036″	practical limit of commercial surveying	11.1 mm	10.2 mm	7.87 mm	4.35 mm
8	0.00000001	0° 00′ 0.000036″	specialized surveying	1.11 mm	1.02 mm	0.787 mm	0.435 mm

A value in decimal degrees to a precision of 4 decimal places is precise to 11.1 metres (36 ft) at the equator. A value in decimal degrees to 5 decimal places is precise to 1.11 metres (3 ft 8 in) at the equator. Elevation also introduces a small error: at 6,378 metres (20,925 ft) elevation, the radius and surface distance is increased by 0.001 or 0.1%. Because the earth is not flat, the precision of the longitude part of the coordinates increases the further from the equator you get. The precision of the latitude part does not increase so much, more strictly however, a meridian arc length per 1 second depends on the latitude at the point in question. The discrepancy of 1 second meridian arc length between equator and pole is about 0.3 metres (1 ft 0 in) because the earth is an oblate spheroid.

Example

A DMS value is converted to decimal degrees using the formula:

$\mathrm {D} _{\text{dec}}=\mathrm {D} +{\frac {\mathrm {M} }{60}}+{\frac {\mathrm {S} }{3600}}$

For instance, the decimal degree representation for

38° 53′ 23″ N, 77° 00′ 32″ W

(the location of the United States Capitol) is

38.8897°, -77.0089°

In most systems, such as OpenStreetMap, the degree symbols are omitted, reducing the representation to

38.8897,-77.0089

To calculate the D, M and S components, the following formulas can be used:

${\begin{aligned}\mathrm {D} &=\operatorname {trunc} (\mathrm {D} _{\text{dec}},0)\\\mathrm {M} &=\operatorname {trunc} (60\times |\mathrm {D} _{\text{dec}}-\mathrm {D} |,0)\\\mathrm {S} &=3600\times |\mathrm {D} _{\text{dec}}-\mathrm {D} |-60\times \mathrm {M} \end{aligned}}$

where ${\textstyle \mathrm {\left\vert D_{dec}-D\right\vert } }$ is the absolute value of ${\textstyle \mathrm {D_{dec}-D} }$ and ${\textstyle \mathrm {trunc} }$ is the truncation function. Note that with this formula only ${\textstyle \mathrm {D} }$ can be negative and only ${\textstyle \mathrm {S} }$ may have a fractional value.

See also

• ISO 6709 Standard representation of geographic point location by coordinates
• geo URI scheme